General Contractor – Roof Replacement

roof installationWhether you plan to install a roof on by yourself or you want to hire a professional to take care of the roof installation, understanding the steps and process involved can help make sure that your roof is installed properly. Here’s a brief overview of the steps undertaken during this project. This focuses more the installation of asphalt roof shingles and the metal roofing.

It’s smart to obtain price quotes for roofing installation from at least four prescreened as well as licensed roof installation and repair contractors before beginning the project so that you have an idea of the cost.

 Steps Involved in Roof Installation

Take Out The Old Roofing

The outdated roofing would most likely be removed before the new material is installed. There are those who install the new roof materials on top of the existing one to save time. But don’t forget that adding several layers could result in premature roof failure. The old roof must be stopped down to the sheathing and then rebuilt.

Inspect The Roof

Once the old roof is removed, check the sheathing. The roof sheathing is comprised of flat panels that offer structural support as well as a base where the roofing materials like the shingles are linked to. Search for moist spots or trouble areas that need to be replaced.

Create Protection Against Ice

If you are living in a place that is vulnerable to ice for a certain time of the year, it is crucial to set up an ice and water barrier around your roof during the roofing installation Myrtle Beach project. This product will go around the roof’s edges, but also at the bottom edge, which is at risk of ice buildup. This underlayment is a sticky one and it sticks to the roof sheathing. It is then nailed down for additional stability and strength with roofing nails.

Add The Drip Edge

The drip edge of your residential roofing will go down in two separate parts of the installation process. The first one is for the roof’s lower part, before the underlayment, and for the roof’s sides it goes on after. Set up the metal drip edge along your home’s bottom edge over top of the water and ice barrier. Then nail it in its place flat and against the roof.

Once you have installed the roof underlayment, you need to do the drip edge on the sides just like how you did it at the bottom. This will help prevent water from running over the siding’s edge and then back below it.

Installation of Roofing Underlayment

Roof underlayment, may it be synthetic or felt paper, is saturated in materials that are water resistant and it comes in #15 and #30 thickness. However, the synthetic products are far more durable compared to the felt option. If you would rather have the best way to protect your roof aside from the roofing itself, you have to invest in a costlier synthetic underlayment. It’s the most durable and convenient option.

Place the underlayment on the roof’s edge and make sure that you secure it in its proper place by using cap roof nails in every four inches along the outer edges and about eight inches at the center. The cap nails must not go through the drip edge, but just above it.

Free estimates for insurance claims or warranty replacement.

Known as the best, most qualified and reputable roofing company Horry County.

Call MB Roofing Pros if you need help in installing, repairing, or maintaining your roof.

Wilmington Roofing Pros
Wilmington, NC 28409
(910) 765-8513